RODE Video Accessories | Microphones / Headphones / Speakers | VideoMic GO II Ultracompact Shotgun Microphone

AT A GLANCE

• Vlogger, Run & Gun, Voiceover, Podcaster
• For Cameras, Mobile Devices & Computers
• Runs on Plug-In Power or USB Power
• Simple Operation with No Controls
• 3.5mm TRS Output to Camera or Headphones
• USB Type-C Digital Audio Output
• Detachable Flat 3.5mm Cable
• Works with Rode Connect Software
• Windscreen Reduces Wind Noise
• Includes Shoe/Pole Shockmount

It gives video content creators, run-and-gun filmmakers, voiceover artists, and podcasters the sound of the highly regarded NTG shotguns in a convenient camera-mount mic that works with cameras, portable recorders, iOS and Android mobile devices, and USB-equipped computers.

Use the VideoMic GO II as a traditional shotgun mic for your DSLR or turn it into a digital microphone by connecting it to your smartphone, tablet, or laptop with separately available cables; in both configurations it delivers focused directivity, low noise, and isolation from external vibrations. When used as a USB microphone, the 3.5mm jack functions as a headphone output for monitoring the live signal or playback from your host device. Since the mic runs on plug-in power or USB power and has no controls or switches, it is easy and fast to operate.

Compared to the original VideoMic GO, the VideoMic GO II was thoroughly overhauled and loaded with design elements in form and function from Rode’s popular VideoMic NTG. With upgrades to the body, shockmount, and cable, plus the ability to operate as an analog or digital USB microphone, this version is a completely different mic from the original VideoMic GO.

Technology Ported from the VideoMic NTG

The VideoMic GO II’s body features acoustic perforations rather than the linear slots traditionally used in shotgun microphones. This annular line tube technology was ported from Rode’s VideoMic NTG to deliver transparency and a natural, uncolored sound.

Directional Sound Pickup

The VideoMic GO II utilizes a supercardioid polar pattern to focus on the sound in front of it while attenuating other sounds from the sides and rear. Its low-noise electronics and sensitive condenser element deliver more detailed audio than mics typically found in cameras and portable recorders.

TRS Camera Connection

A detachable 3.5mm TRS cable is supplied to quickly hook up your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder. Both short and flat, the cord is easy to keep tidy.

Full USB Microphone Functionality

Plug the VideoMic GO II into your computer, smartphone, or tablet via USB to use it as a digital USB microphone for direct recording to your favorite software. Its integrated analog-to-digital converter operates at 24-bit / 48 kHz to provide full-resolution, uncompressed audio quality.

MFi-Certified for Apple iOS Mobile Devices

The VideoMic GO II is officially MFi-certified, unlocking complete compatibility with Lightning-equipped iOS devices, including iPhone, iPad, and iPod. Plug your VideoMic GO II into your iPhone, iPad, or iPod via USB with the Rode SC15 USB Type-C to Lightning accessory cable (available separately).

Convenient Headphone Monitoring

When using the VideoMic GO II as a USB microphone, plug your headphones into its 3.5mm output for convenient headphone monitoring.

Uses Plug-In Power or USB Power

No batteries are needed for the VideoMic GO II. It runs on plug-in power through the TRS connection to your camera, or it can be bus powered via USB.

Shockmount with Sliding Rail and Cable Management

Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to opt for a rugged Rycote Lyre suspension-style shockmount designed for attachment to a camera or boom pole. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. The shockmount’s sliding rail system lets you shift the position of the mic forward or backward for perfect placement. Forget about messy cabling; the built-in cable management keeps the cord run orderly.

Windscreen Minimizes Wind Noise

The VideoMic GO II includes a foam windscreen to minimize unwanted wind noise from light breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode WS12 (available separately).

Works with Rode Connect

The VideoMic GO II can be fully integrated with Rode Connect software, allowing you to capture quality sound for your content with more freedom and flexibility than ever before, perfect for IRL streaming, recording podcasts, and more.

Primary Applications  Audio for Video

Form Factor  Camera-Mount / Shotgun Mic

Intended Sound Sources  Speech/Voice Over, Room Ambiance

Sound Field  Mono

Operating Principle  Pressure Gradient

Capsule  Electret Condenser

Polar Pattern  Supercardioid

Orientation  End Address

Circuitry  Solid-State

Pad  None

High-Pass Filter  None

Tone Adjustment  None

Indicators  1 x Blue Single LED (Power)

On-Board Controls  None

WindscreenFoam (Included)

Frequency Range  20 Hz to 20 kHz

Maximum SPL  110 dB SPL

Impedance  2.2 Kilohms

Sensitivity  -31 dBV at 1 kHz

Dynamic Range  95 dB A-Weighted

Signal-to-Noise Ratio  79 dB A-Weighted

Equivalent Noise Level  15 dB A-Weighted

Output Connectors (Analog)  1 x 1/8″ / 3.5 mm TRS Female (on Mic)

Output Connectors (Digital)  1 x USB Type-C Female (on Mic)

Headphone Connector  None

Wireless Connectivity  None

Bluetooth  None

A/D Conversion  24-Bit

Sample Rate  48 kHz

Operating System Support  Android, Windows, iOS, macOS/OS X

Mobile Device Compatibility  iPhone 6 or Later
iPad Pro 1st Gen. or Later
  iPad Air 1st Gen. or Later
  iPad 6th Gen. or Later
  iPad Mini 2 or Later
  iPod Touch 7th Gen.
  Android Smartphone
  Android Tablet

Available Port  USB 2.0P

Bus Power  USB

Operating Voltage  2 to 5 V (Plug-In Power)
5 V (USB Bus Power)

Color  Black

Mounting  Camera/Shoe-Mount, Shockmount (Included)

Included Case  None

Included Filters  None

Dimensions  ø: 0.9 x L: 4.7″ / ø: 21.6 x L: 120 mm (Microphone)
H: 3.4 x W: 2.8 x L: 5.9″ / H: 86 x W: 70 x L: 150 mm (with Mount, with Windscreen)

Weight 1.2 oz / 33 g (Microphone)

Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone

• SM8-R Camera Mount
• Foam Windscreen
• SC14 3.5mm TRS Cable